Pair any two SmartMike+s in M/S mode and connect either of the two paired SmartMike+s to a mobile phone via Sabintek TRRS 4 pole connector as a receiver. The other paired SmartMike+ acts as wireless microphone for recording. Any live streaming app such as Facebook can acquire the wireless audio from SmartMike+ in live broadcasting. Meanwhile, for any music apps that play music on mobile, , the music will mix into the as background music for live broadcasting. Please note that volume change of music is necessary to ensure the BGM is in proper level. And the BGM could be monitored via earphone via a 3.5 mm jack on the SmartMike+.

Pair any two SmartMike+s in M/S mode and connect either of the two paired SmartMike+s to a mobile phone via Sabintek TRRS 4pole connector as a receiver, the other paired SmartMike+ acts as wireless microphone for recording. This works with native app or any third party camera apps on the phone. Make sure the gain level is adequate. To adjust the gain, press the power button of the SmartMike+ as wireless microphone in a sequence of Medium-Low-High.

To use the SmartMike+ mic without the iOS or Android app, you need to use two of them with one plugged into the mic input of your computer with a post cable. If you buy the 2 pack, it’s all in there. The setup is MS (master/slave) and works great. You cannot though do what you want with a single mic as that requires the SMike App.

Hi there,One set SmartMike+wireless microphone can work with the "SMike+" APP to get the stereo.If you don't want to use the "SMike+" APP, you might need 2 sets of SmartMike+ to get the stereo.One SmartMike+(as a receiver) connect the iPhone/Android Phone via 4-pole male to male aux cabl (package included), and another SmartMike+(as a microphone) pair with the receiver SmartMike+ Questions on,please so send the buyer-seller message, we will be always here with you.